Front view of Cisco 1800 series
Back view of Cisco 1800 series
Cisco 1800 Series Interface Guide
|1||System Power (SYS PWR) LED||2||System Activity (SYS ACT) LED|
|1||WAN Slot||2||Expansion switch port|
On the back side of the router WAN slot ids designed which is used when further expansion is required in the network by inserting an extra WIC card in the router.
2-Expansion Switch Port
Expansion switch ports on the back side of the router are used for wired expansion when required in the network. The expansion slots are embedded with high data transfer rate.
|1||BRI ports||2||FXS ports|
|3||Power over Ethernet (PoE) ports||4||Fast Ethernet (FE) port|
Basic Rate Interface ports are used for the voice data transmission in the network.
Fast Ethernet port is featured with 100 Mbps data transmission rate.
Serial Number is the code used for vendor’s record.
SYS LED goes ON, when router is supplied electrical power and is switched ON. When ON it goes Solid Green in color.
PoE LED is switched ON and goes Solid Green in color when device like IP phone is connected with router and data and power is being passed on the same Ethernet cable.
WLAN LED starts blinking green when router is working in wireless mode.